| Zip Covering Machine ZLTFM82-475-600 | |
| Introduction | |
| Model Wall and Roofing Colored Steel Cold Roll Forming Machine consists of uncoiler and its base, coil sheet guiding equipment, film covered device, roll forming system, post-cutting equipment, hydraulic station, controlling system, supporter table. | |
| Technical Parameters | |
| Material Spec | Colored steel sheet / galvanized steel sheet |
| Thickness of Coil Sheet | 0.3 --0.7 mm |
| Main Motor Power | 7.5kw |
| Forming Speed | 8--10m/min |
| Hydraulic Station Power | 3kw |
| Quantity of Stands | About 18 groups |
| Hydraulic Pressure | 10~12Mpa |
| Controlling System | PLC |
| Index Error of Length | 10m±2mm |
| Total Weight | About 1000kg |
| Voltage | 380V 3 phase 60Hz or to the buyer's requirement |
| Material of Main Equipment | |
| Roller Material | high grade No.45 forged steel, plated hard chrome on the surface of roller with thickness 0.05mm |
| Active Shaft Material | high grade No.45 carbon wrought steel at Φ 75mm. |
| Cutter Blade | Cr12 mould steel with quenched treatment. |
| Electric Elements | Control system with PLC model S7-200, Siemins.transducer with ABB control panel with TP170, Siemens. It can input 10sets of spec at one time |
| Oil Tank Model | CB-E310 |
| Component and Function | |
| 1. Sheet guiding equipment: Using guiding equipment of leader sliding block style. The width and the left or right position can be adjusted only by adjusting the leader, then the sliding block can realize left or right movement. | |
| 2. Mainframe Transmission: Transfer the main motor power to the rollers through chains and sprockets, and also transfer the coil sheet. | |
| 3. Roll forming system: The main frame of machine is welded separately and the outside wall is connected by screw after being roto-blasted on the surface. The rollers are surface-chrome plated after being machined by the exact machine tool.. | |
| Designated use | |
| 1. Some final products for Automobile. | |
| 2. Some final products for Building, such as for Roofing / Ceiling / Wall materials, and dry wall (track and stud) material. | |
| 3. Some final products for Gate-Panel, Guard-Panel and sound insulation | |
http://www.buildingint.com/pid10206468/Zip+Covering+Machine.htm
